Bushcraft Blank D2 Hot Rolled, 8.5″ Long, .14″ Thick

Bushcraft design D2 Steel

8.5″OAL x 1″W

 .14″ thick

 2qty – 7/64″ Pin holes

 2qty – 3/16″ Pin holes

 3/16” Lanyard hole

 

D2 is a high carbon, high chromium content steel that is considered “semi-stainless”.  D2 is more corrosion resistant than other High Carbon Steel.  It still has great wear resistance and toughness. 

 

Note: These blanks will need to be heat treated. Heat Treat table below.

 

Heat Treatment of D2 Steel
AISI	Preheat Temp. (1)	Austenitize Temp. (2)	Hold Time (Minutes) (3)	Ouench	Temper Temp.(6)	Typical Hardness HRC
D2	1400/1450	1825/l875	15 45	AIR	400/1000	55/62